Home IoT Turning a Can of Ham Right into a Ham Radio Antenna

Turning a Can of Ham Right into a Ham Radio Antenna

Turning a Can of Ham Right into a Ham Radio Antenna


Ham radio antennas

Because the early twentieth century, individuals around the globe have been sending and receiving beginner radio alerts to study and talk with one another. However earlier than any of this may occur, operators should receive the requisite licensing, transceivers, and most significantly, the antenna for broadcasting/selecting up radio waves.

Ham radio can depend on all kinds of antenna configurations, as sure buildings convey particular advantages and/or price financial savings. Slot antennas specifically are fairly easy as they’re, no less than topologically, a conductive plate with a slot minimize within the center. With this in thoughts, the Ham Radio Rookie (Ben Eadie), began a collection known as “Will It Ham” by which he experiments with varied generally out there objects to see if they may make appropriate antennas. And in his inaugural video, he constructed a ham radio antenna from an precise can of ham.

Discovering the best conductor size

Because of how radio waves work together with conductors, one needs to be aware when constructing their antenna of what frequencies of alerts it can choose up and radiate the perfect. Because the 70cm/440MHz band is common and has available tools, discovering a can with a 35cm circumference can be best since it’s half the wavelength’s size and might let the sign resonate effectively inside the dipole slot antenna. Fortunately for Eadie, his can of ham measured in at precisely 35cm round.

Constructing a mount and slot antenna

After cleansing out the residual ham from the can and splitting it in half, Ben designed a collection of 3D printed spacers that match between the 2 halves and hold them round a quarter-inch aside. Subsequent, he sanded away the can’s ink so as to connect a bit of copper tape throughout the 2 halves to finish the slot antenna together with two different locations for the sign feed factors. Lastly, he glued the ham can to a bit of PVC and ready it for a check.

Does it work?

As soon as outdoors and close to a 70cm repeater, Eadie reached out to his pal to get a learn on if the can works within the first place and to listen to how noisy it’s. A lot to his shock and delight, the outcomes had been nice as others might hear him clearly and vice-versa. With this success, Eadie plans on increasing his vary of experiments to different, weirder objects and even strive placing the ham again into the can for the final word “ham ham can antenna”. You may watch this mission’s construct log and subsequent check right here on YouTube.



Please enter your comment!
Please enter your name here